Traverse Titan Rescue Stretcher

Features StratLoad attachment points which allow bridles to be attached inside of the top rail. Durathene netting mesh and molded high density polyethylene back support. The steep sided design allows a narrower stretcher with the same width at
the bed which will accept the standard sized backboards. The narrow width and rounded ends provide greater maneuverability in tight locations. Comes with four stretcher straps. Stainless Steel. 83 x 23 inches. 31 lbs.
• Also available in split apart version
ITEM# 7210 Standard $671
ITEM# 7213 Take Apart $990
 

Traverse Advantage Rescue Stretcher The Traverse Advantage Plastic Stretcher combines a fully internal stainless steel frame with a high-density polyethylene plastic shell that protects the patient and provides a smooth bottom surface if you need to slide the stretcher. The frame provides a 2,500 lb. strength rating and fully supports the patient. The shell has generous hand cutouts for carrying the stretcher and the 7/8 inch diameter top
rail is comfortable on the hands. The closed cell foam patient pad prevents absorption of fluids and is resistant to the harshest of cleaning agents. For high-angle evacuations, the Advantage has
Traverse’s patented StratLoad attachment points for clipping carabiners inside the frame rails. The Advantage Plastic Stretcher is designed for both low and high angle rescue.
ITEM# 7261 $699

Traverse Gazelle Rescue Stretcher Designed as a durable and versatile light duty disaster response stretcher. The unique feature of the Traverse Gazelle Stretchers is the tubular runner rails that run the full length of the stretcher along the bottom. These provide a very strong and durable base, and make it less prone to damage from regular use. Excellent for those who are on very limited budgets for rescue equipment. Powder coated steel. 82 x 24 inches. 28 lbs.
• Also available tapered
ITEM# 7231 Tapered $320
ITEM# 7230 Standard $320

Yates Spec Pak

Patient packaging and extrication system that combines the backboard immobilization of a short board with the suspension and support of a full body harness. The Spec Pak system utilizes an integrated polyethylene board along the back to reduce wear and create a smooth sliding surface for confined space operations. Grab handles located at the head, shoulders and sides allow rescuers to better handle the patient package during movement through tight spaces. Extremely useful for any confined space operation where a vertical environment is encountered. In addition, the Spec Pak system is a lifting harness, thus eliminating the need for a separate victim harness. Patient can be lifted vertically from D ring located at top of back board. Unique self-adjusting (sliding) cervical restraint eliminates the problems associated with lifting patients vertically while secured to a rigid backboard. Spec Pak is only intended as a limited spinal immobilization system. It must be used in conjunction with proper spinal immobilization such as the use of a cervical collar where conditions and protocols dictate. Weight 15 lbs. LIFTING BRIDLE SYSTEM is now included with SPEK PAK(Spec Pak will not function in all lifting modes without the use of Lifting Bridle).

• New chest located D rings (standard Spec Pak only) allow patient to be lifted in semi-fowlers position.
• New lifting bridle (item 905) now Included
• Meets ANSI/OSHA Class III harness standards
• XCollar universal one size adjustable cervical collar (item 904C) included
• Includes training DVD
• Color coded straps make application quick and easy
• Fits from small children to large adults
• Also available in military coyote brown/black version with camo backpack carry bag (item 901)

NEW: 903 Intrinsically Safe Spec Pak
Lighter weight version with all aluminum/stainless steel hardware. Meets intrinsically safe requirements for confined space explosive environments. IS Spec Pak does not have horizontal lifting capabilities. Weight 14.5 bs.

New SPEC PAK Horizontal Lifting Video

CE Certified Yates Spec Pak info.

SPEC PAK TRAINING VIDEO(Spec Rescue)

Spec Pak training video available
Call 1-800-Yates-16 for a free copy

ITEM# 900 $1500.00
ITEM# 903 $1400.00

Yates Spec Pak Lifting Bridle System

New lifting bridle system allows for horizontal, semi sitting and semi-vertical (75 degree) positioning of the patient. This system of lifting is useful when longer suspension times are anticipated, reducing the chances of development of suspension syndrome. Lifting bridle is attached to new chest mounted D-rings on Spec Pak. Head, crotch and leg strap allows for complete stabilization of the patient without the need of a full litter. Easilly adjustable with use of 6kN rated Ancra Cam Buckles. Lifting bridle has full strength 22.2 kN backup strap for attachment to head located lifting D-ring on Spec Pak.All carabiner and connectors are included.

Military version of lifting bridle comes in Terra/OD colors.

Lifting Bridle can only be used on new style Spec Paks with chest mounted D-rings.

New SPEC PAK Horizontal Lifting Video

ITEM# 905 Standard Bridle $250.00
ITEM# 906 Military Bridle $250.00

NEW Spec Pak Wind Turbine Lifting Bridle System

New Spec Pak Spreader Bar was designed for Wind Turbine rescue techniques that require horizontal transfer of a patient. Spreader Bar is connected to Cchest D-rings on Spec Pak. This technique utilizes two 4:1 Mini Haul or AZTEC kits attached to the swival on the spreader bar to move a patient in Hub and Nacelle rescue situations. Spreader Bar can also be attached 2:1 Pick off strap of the suspension system to allow for horizontal, semi sitting and semi-vertical (80 degree) positioning of the patient. This system of lifting is useful when longer suspension times are anticipated, reducing the chances of development of suspension syndrome. Lifting bridle is attached to chest mounted D-rings on Spec Pak. Head, and leg strap allows for complete stabilization of the patient without the need of a full litter. Head Strap allows is easilly adjustable with use of 6kN rated Ancra Cam Buckles. Lifting bridle has full strength 22.2 kN rating. All carabiner and connectors are included.

Complete Bridle Kit Includes:

- Spreader Bar w/swivel and carabiner connectors
- 2:1 Pick off Strap
- Leg Support Section w /Yates-DMM 1835 autolock carabiner.
- Head adjuster strap to adjust patient suspension angle.
- DMM 1162 ANSI carabiner to connect spreader bar to suspension system.

ITEM# 905WT Lifting Bridle Complete $375.00
ITEM# 906SPREADER -Spreader Bar w/Swivel and Carabiners only. $225.00

AIR-LIFT RESCUE VEST (A.R.V.)

The latest in victim extraction and rescue. The A.R.V. brings together fast donning and rapid extraction for short haul and hoist operations. Adjustable for a one size fits all application to accommodate patients from 50 to 400 lbs. The easy side adjustment system provides for patient positioning allowing for a more vertical posturing of patient if desired. This system allows for multiple in-flight configurations. Designed to fit over bulky clothing, PFD's and military tactical vests. Low profile, rear and side grab handles work seamlessly in hoist operations. Fully reinforced webbing substructure makes this unit bombproof! Comes with steel auto locking attachment carabiner and storage/deployment bag. Colors: blue or MultiCam. Strength 4000 lbf. Weight 6 lbs.

• One size, fully adjustable
• Swiftwater version uses mesh fabric on seat portion to allow for
quick drainage.
• Military version made of MultiCam fabric and terra webbing.


ITEM# 908 (Standard Rescue version, Blue Cordura) $775.00
ITEM# 908M (Swift Water Ver.) $775.00
ITEM# 909 (Military, Multi-Cam) $815.00

AIR-LIFT RESCUE VEST (A.R.V.)

The latest in victim extraction and rescue. The A.R.V. brings together fast donning and rapid extraction for short haul and hoist operations. Adjustable for a "one size fits all" application to accommodate patients from 50 to 400 lbs. The easy side adjustment system provides for patient positioning, allowing for a more vertical posturing of patient if desired. This system allows for multiple in-flight configurations. Designed to fit over bulky clothing, PFD's and Military Tactical vests. Low profile, rear and side grab handles work seamlessly in hoist operations. Fully reinforced webbing sub-structure makes this unit bomb proof! Comes with steel auto locking attachment carabiner and storage/deployment bag. Colors: Blue or Military Multi-Cam. Strength 4000 lbf. Weight 6 lbs.

• One size, fully adjustable
• Available Swift Water version that uses mesh fabric on seat portion of vest to allow for quick drainage.
• Available in Military version made of Multi-Cam fabric and terra webbing.

 

 

ITEM# 908 (Standard Rescue version, Blue Cordura) $775.00
ITEM# 908M (Swift Water Ver.) $775.00
ITEM# 909 (Military, Multi-Cam) $815.00

Litter Cover Made from durable vinyl fabric, this stretcher cover
protects a stretcher and contents from the most
extreme weather conditions. Oversized to allow
room for storage of extra items in litter.
ITEM# 436 $180

Backboard Strap 15 foot adjustable backboard strap used for patient
restraint. Uses camlock buckle system for quick and
secure adjustment. Available in blue, red, black.
ITEM# 445 $24 ea.

Adjustable Stretcher Strap Loops around litter rail and attaches to rescuer.
Easily adjustable for most efficient positioning.
ITEM# 437 $30

Stokes Litter Pre-rig Fully adjustable spider intended for use with any stokes litter. Unique Y suspension system drastically reduces congestion at the upper attachment point. Adjustable to a minimum height of 18 inches above the litter
for the tightest helicopter evacuations. The spider adjusts to a maximum length of 5 feet utilizing quick adjust mil spec hardware. Half of the pre-rig can be used as a low angle evacuation stretcher harness, eliminating the need to purchase separate harnesses.
• Rigging plate and carabiners shown sold separately
• Overall strength 5000 lbf.
ITEM# 435 $150

Sierra Safety Litter Pre-rig Designed by Sierra Safety, this new litter pre-rig is really deluxe. Fully adjustable Y spider suspension system drastically reduces congestion at the upper attachment point. Configured with 2 to 1 mechanical advantage rescuer attachment strap for easy adjustability. Adjustable to a minimum
height of 18 inches above the litter for the tightest helicopter evacuations. The spider adjusts to a maximum length of 5 feet utilizing quick adjustable mil spec hardware. Unique single attachment of both victim and rescuer adjustable straps reduces further congestion in the collection ring.
• Steel O ring strength is 10,000 lbf.
• Overall strength 5000 lbf.
ITEM# 434 $240

[Rope Rescue] [Rope] [Fire Rescue] [Hardware] [Confined Space] [Anchors] [Industrial] [Lanyards] [Tactical] [Price List]


YATES Gear Inc. 2608 Hartnell Ave. Suite 6, Redding, CA 96002
Phone: 530.222.4606     Fax: 800.YATES.16
info@yatesgear.com