Basic Rope Access Harness

A tuned down version of the RTR Tower Access harness. Waist belt portion of the harness uses smaller sized D rings to save weight and reduce bulk. New wider anatomical waist pad for increased comfort and added back support. Modular work/tool pouch system is included. Leg pad orientation can be adjusted to allow the user to obtain a perfect placement of the leg pad system to accommodate personal preferences. Easily adjustable for variations in clothing by use of camlock buckles. Attachment points at waist, hips, chest, back (lumbar) and back (dorsal). Chest harness specifically designed to incorporate a chest ascender (not included) for rope access work and the shoulder straps are specially tailored to reduce chafing of the neck. Weight 5lb. 6oz.


• Sizes S, M, L, XL
• UL classified to meet NFPA 1983/2006 edition standards
• UL Classified ANSI/OSHA Z359.1-2007 and CAN/CSA Z259.10-06 harness standards
Removable contoured shoulder pads included.

 

ITEM# 387 $407

 


Basic Rope Access Professional Harness

A state-of-the-art version of out popular Basic Rope Access harness. New lightweight aluminum D rings are used on side positioning, chest, and dorsal fall protection connections.Wide anatomical waist pad for increased comfort and added back support. Modular work/tool pouch system is included. New Cobra ANSI Z359.1 certified aluminum quick connect leg buckles are used for ease of donning. Leg pad orientation can be adjusted to allow the user to obtain a perfect placement of the leg pad system to accommodate personal preferences. Attachment points at waist, hips, chest, back (lumbar) and back (dorsal). Chest harness specifically designed to incorporate a chest ascender (not included) for rope access work and the shoulder straps are specially tailored to reduce chafing of the neck. Weight 5lb. 6oz.


• Sizes S, M, L, XL
• Meets ANSI/OSHA Class III full body harness standards
Removable contoured shoulder pads included.

ITEM# 387P $452

Arizona Chair

Together with Ropes That Rescue Ltd., we designed this adjunct suspension seat designed for use in conjunction with a work positioning harnesses (Basic Rope Access, RTR Tower Access, Voyager, etc.). Suitable for work involving alternate periods of suspension on a rope. Increases comfort in suspension while still allowing complete leg mobility for climbing. Designed to connect to rear slot of side positioning D-Rings of harness with stainless steel screw link (provided). Cordura covered, close cell laminated pad is 4" width. Arizona chair is easily adjustable on both sides of seat. One size fits most. Weight 2.5 lbs.

• Sizes M (24"+), L(28"+), XL(32"+)
• Weight 2.5 lbs

ITEM# 407 $125

NEW Basic Rigging Harness

A tuned down super light weight version of the Basic Rope Access harness at a very attractive price. Waist belt portion of the harness uses smaller and thinner padding material to save weight and reduce bulk. Wide anatomical leg pad are also a thinner padding material but offer adequate comfort and support. Leg pad orientation can be adjusted to allow the user to obtain a perfect placement of the leg pad system to accommodate personal preferences. Easily adjustable for variations in clothing by use of camlock buckles. Dorsal D ring is easily adjustable on rear of chest. Attachment points at waist,chest, and back (dorsal). Rear haul/tag line attachment webbing loop(Rated 3,600 lbf.). Chest harness specifically designed to incorporate a chest ascender (not included) for rope access work and the shoulder straps are specially tailored to reduce chafing of the neck. Weight 4lb. 4oz. Great harness for entry level rope access, theatrical rigging, wind tower climbing, short haul, and basic rope rescue uses.

• Sizes S/M, L/ XL
• UL classified to meet NFPA 1983/2006 edition standards
• UL Classified ANSI/OSHA Z359.1-2007 and CAN/CSA Z259.10-06 harness standards
• Optional contoured shoulder pads available (item 414) NEW "Stablock Leg Buckle System"

ITEM# 386 S/M $299
ITEM# 386 L/XL $299

Petzl Podium Adjunct suspension seat designed for use in conjunction with a fall arrest or work positioning harness (Fall Safe, Voyager, Basic Rope Access, RTR
Tower Access, etc.). Suitable for work involving alternate periods of suspension on a rope and walking. Excellent comfort in suspension with wide seat for stability and leg mobility. Rigid side edges help prevent the webbing straps cutting into the thighs. Includes three easily accessible equipment loops. Easy adjustment with double back buckles. Easily positioned on the back when not in use.
Weight 2.5 lbs. (1170g).
ITEM# 7040 $185

Bungee Tool Teather Unique tool teather with high strength. Retracted length 36 inches, full extension 60 inches. One end is designed with half twist to allow for girth hitching of tools. Strength 850lbf. 4kN.
ITEM# Tool Teather $8.50

BlueWater Mini Haul 4:1 Kit Utilizes 35 feet of 8 mm Technora rope with nylon
core for superior strength, low stretch and sharp
edge resistance. Rope also features sewn end terminations
for strength, compactness and safety.
Includes Yates Bolt and Tool Bag (small), a set of
lightweight SMC JR/JRB pulleys, 2 Yates Oval
Screwgate carabiners, one 11 inch sewn 6mm Hybrid
prusik and one 6mm Maillon Rapide quick link.
ITEM# 6107 $192.00
 

Yates Mini Haul 4:1 Kit Deluxe mini haul including easy to release Kong
Duck for progress capture. 35 feet of 8 mm Technora
rope with nylon core for superior strength, low
stretch and sharp edge resistance. Rope also features
sewn end terminations for strength, compactness
and safety. Includes Yates Bolt and Tool Bag
(small), a set of lightweight SMC JR/JRB pulleys, 2
Yates Oval Screwgate carabiners, and one 6mm
Maillon Rapide quick link.
ITEM# 6106 $248.00
 

Power Fly Harness
Carabiner
Quick connect carabiner designed to replace the existing screw link connectors used on many full body harnesses. Used to connect the seat and chest portions of many Yates full body harnesses such as the Voyager, Voyager Riggers and Rope Access. Stainless steel. Strength 26kN.
• Certified to ANSI/OSHA and CAN/CSA Standards
ITEM# 1785 $40.00

NEW DGR Rope Access Rope

BlueWater 11.0 mm DGR Rope was designed in conjunction with rope access professionals as a solution to the demands and challenges of their every day jobs. This all new rope design addresses the shortcomings seen in other styles of rope. The firm sheath retains its shape and won't flatten out when dry, wet or whenever. The specialized core is a custom cabled construction to reduce bounce and prevent lumps. This rope empowers the user with predictable handling characteristics and flawless function. Polyester sheath for superior cut and abrasion resistance. UL Classified to meet NFPA 1983/2012 edition for Technical Use ropes. Nylon core. Available in: 100M and 200M Lengths. Color: White with Blue marker stripe or White with Red marker stripe.

Elongation: 3.9% @ 300 lbf. 6.0%@ 600 lbf. 8.8% @1000 lbf.
Diameter: 11mm
Grams Per Meter: 85
Tensile Strength: 7373 lbf. [32.8 kN]
Sheath Mass: 48%
Weight Per 100 Feet: 5.78 lbs

Item # Name color MBS (lbf/kN) elong. (300, 600, 1000lbf) price
517720 DGR 11mm x 200' white w/red or blue 7373/32.8 3.9/6.0/8.8 $184.00
5817730 DGR 11mm x 300' white w/red or blue 7373/32.8 3.9/6.0/8.8 $275.00
517760 DGR 11mm x 600' white w/red or blue 7373/32.8 3.9/6.0/8.8 $552.00
5177200M DGR 11mm x 200m white w/red or blue 7373/32.8 3.9/6.0/8.8 $603.00

ISC RED® Back-up Device, with Popper Cord

The RED is a simple, yet highly effective back-up device.The RED's non-aggressive Cams have a positively locking spring, which means that the device is self-parking (rather than self-tailing, like many Ropegrabs). This self-parking function is important for Rope Access work techniques as they stipulate that the back-up device should be positioned so as to reduce fall factors to a minimum.

The RED makes use of 'Rotational Braking'- the more the device rotates clockwise, the greater the build up of friction, which provides the automatic braking in the event of a fall or sudden pull on the Cows-tail.

To increase the effectiveness of the Rotational Brake in a panic situation (for example, a main-line failure), the RED can be fitted with a 'Popper' tow cord release clip*. For further information on the Popper clip, please download the RED Back-up Device Datasheet. The Red is tested and approved for "Two Person Rescue" Loads for Rope Access situations.

Meets ANSI Z359.1-2007 and OSHA requirements in North America. Certified to CE EN 353-2, EN 358, EN 567.
Lazer marked ANSI Z359.1-2007.

Technical specifications:
10.5 to 11.0 mm semi-static ropes (EN 1891 type A) certified with the device. Weight 202g

If used for fall protection, to meet ANSI and EN requirements,RED Back-up Device must be used without a lanyard or in conjunction with a lanyard (included with the Back-up) under 40 cm (16 inches) to limit maximum potential fall distance to less than 1 meter.

Link to product information: RED Back-up Device User Instruction Manual pdf

Link to product information: RED Back-up Device Date Sheet pdf

ITEM # 799 $120.00


Kong Back-Up®

A new mobile fall arrester from Kong that follows the operator in both directions. With its unique locking cam configuration, the Back-Up supports fall factor 2 falls in a semi-dynamic way, without damage to the safety rope.

• Stops a fall, slide or uncontrolled descent
• Works on vertical or angled rope
• Moves up or down along the rope without manual intervention
• Easy to install and remove at any point on the rope
• For rope access applications unit can be used with tug cord

Meets ANSI Z359.1-2007 and OSHA requirements in North America.
Certified to CE EN 353-2, EN 358, EN 567.
Lazer marked ANSI Z359.1-2007.

Technical specifications:
10.0 to 12.0 mm semi-static ropes (EN 1891 type A) certified with the device
Comes with the Kong Steel Oval auto locking carabiner
205g + carabiner (180g) 385g. total


If used for fall protection, to meet ANSI and EN requirements, Back-Up must be used without a lanyard or in conjunction with a lanyard (included with the Back-up) under 40 cm (16 inches) to limit maximum potential fall distance to less than 1 meter.

Link to product information: BACK-UP Product Information

ITEM # 800 $155.00


Petzl RIG Descender

Designed for rope access work (expert users only). Multi-function handle allows the user to unlock the rope and control the descent with the hand on the
free end of the rope and position themself while on the rope without tying off the device. The automatic return system on the handle limits risks in case of an
involuntary action by the user. The safety gate on the moving side plate helps prevent dropping the device and facilitates installation of the rope and passing intermediate anchors. Can also be used for short ascents (RAD system). For rope between 10.5 and 11.5mm in diameter. Colors: Black ($155.00) or Gold.

Available January 15, 2010
PETZL Product Information and training Video

ITEM# 7018 $150.00

Petzl I’D Self braking device designed for descending rope and for belaying. Easily installed on the rope without disconnecting it from the harness. Anti-panic feature built in. When the user pulls too hard on the handle it causes the device to lock up. Easily releaseable after locking. Climbing is also possible with the addition of a rope grab and a foot stirrup or etrier. Can also be used effectively in haul systems. Great for rope access work. NFPA G.

ITEM# 7020 $225.00

SMC 4 Bar U-Racks This compact rack is fitted with 4 long-wear tubular stainless bars, two of which are tie-off bars. This rack design allows the user to vary the friction without
adding or dropping bars or disconnecting from the system like traditional racks, whether it is being used in a controlled, fast single person rappel or a heavy rescue lower. As more professional trainers begin to expose their clients to the benefits of this alternative style rack, it is clear they are growing in acceptance and popularity. Certified to NFPA 1983/2001 edition.
ITEM# Rack Type Type of Bars  
1404 Straight Stainless Steel $113.50

ISC Rescue Ascenders Durable heavyweight construction specifically designed for rigging and rescue applications. These are no lightweight rock climbing ascenders! Easy to operate with gloved hand, these ascenders come with large thumb release on cam, large molded hand grip and double clip-in points. Unique cam design allows for increased strength. Will accommodate 9 to 13 mm ropes. Strength (frame) 6000 lbf.
 
ITEM# 1011 $200.00 pr.
 

Kong Futura Rope Handle

Innovative lightweight handled ascender. Enables rope ascending and hand line operation with a super lightweight unit. Comes with two interchangeable handles. Ascenders available right or left hand. Accepts ropes from 8 to 12 mm.
Weight 125 grams ea.

 
ITEM# 1876R $70.00ea.
ITEM# 1876L $70.00ea.
 

Kong Duck Ascender

Super small simple ascender for a multitude of lightweight, low profile uses. Great for super light fixed rope work. Will also work on slings! Accepts ropes
from 8 to 13 mm and slings from 10 to 15 mm wide. Weight 70 grams.

 
ITEM# 888 $58.00 ea.
 
 

Petzl Croll Attaches to front of harness in chest area to help user maintain an upright position and serve as a progress capture. Yates Rope Access harness and RTR Tower Harness have attachment points already equipped to utilize the Croll’s excellent features.

ITEM# 7016 $57.00

DMM 3 ANSI Twistlock

High strength forged aluminum alloy carabiner. The only carabiner currently that meets the new ANS Z133.1-2007 strength requirements. Unique patented three stage autolocking gate mechanism allows for 2700 lbf. (12kN) gate strength. Gate open strength 2250 lbf. (10kN). Comes with captive pin. Manufactured in Wales by DMM Ltd. Meets ANS Z133.1-2007 gate face, minor axis ansd side lead strength of 3600 lbf. (16kN)

ITEM# MBS (lbf/kN) gate opening price
1162 6300/28 .9 inch $36.00

DMM 3 Stage Ovalock

High strength forged aluminum alloy carabiner. Designed for arborist and rigging use. Unique patented three stage autolocking gate mechanism allows for 2700 lbf. (12kN) gate strength. Gate open strength 2250 lbf. (10kN). Comes with captive pin. Manufactured in Wales by DMM Ltd. Meets ANS Z133.1-2000 and ANSI Z359.1-1992

ITEM# MBS (lbf/kN) gate opening price
1161 6300/28 .9 inch $36.00

DMM Yates
TriLock® Carabiner

Super lightweight aluminum forged carabiner for tactical, rescue, rigging and rope access applications. Unique patented three stage autolocking gate mechanism allows for 1800 lbf. (8kN) gate strength. Keylock style gate. Gate open strength 1800 lbf. (8kN). Manufactured in Wales by DMM Ltd. Meets ANSI Z133.1-2000 and ANSI Z359.1-1992. Weight 74 grams.

Available in matte black with black, red or blue gates

ITEM# MBS (lbf/kN) gate opening price
1837 6300/28 .8 inch $29.00

1837R

6300/28 .8 inch $29.00
1837BU 6300/28 .8 inch $29.00

DMM Yates
Quicklock Carabiner

Super lightweight aluminum forged carabiner for tactical, rescue, rigging and rope access applications. Quicklock two stage autolocking gate mechanism allows for 1800 lbf. (8kN) gate strength. Keylock style gate. Gate open strength 1800 lbf. (8kN). Manufactured in Wales by DMM Ltd. Meets ANSI Z133.1-2000 and ANSI Z359.1-1992. Weight 74 grams.

Available in matte black

ITEM# MBS (lbf/kN) gate opening price
1836 6300/28 .8 inch $25.00

DMM Yates
Screwgate Carabiner

Super lightweight aluminum forged carabiner for tactical, rescue, rigging and rope access applications. Secure screwgate locking mechanism allows for 1800 lbf. (8kN) gate strength. Keylock style gate. Gate open strength 1800 lbf. (8kN). Manufactured in Wales by DMM Ltd. Meets ANSI Z133.1-2000 and ANSI Z359.1-1992. Weight 69 grams.

Available in matte black

ITEM# MBS (lbf/kN) gate opening price
1835 6300/28 .8 inch $21.00

DMM Yates
Tactical Carabiner

Super lightweight aluminum forged carabiner for tactical, rescue, rigging and rope access applications. Non-locking gate mechanism allows for 1800 lbf. (8kN) gate strength. Keylock style gate. Gate open strength 1800 lbf. (8kN). Manufactured in Wales by DMM Ltd. Meets ANSI Z133.1-2000 and ANSI Z359.1-1992. Weight 64 grams.

Available in matte black

ITEM# MBS (lbf/kN) gate opening price
1834 6300/28 .8 inch $18.00

DMM Revolver Screwgate Carabiner/Pulley

Friction reducing pulley integrated into a carabiner! Keylock gate that does not snag on ropes or gear. Screwgate locking mechanism. I-beam construction for increased strength. Ideal for use in hauling or rescue systems. The 7075 series pulley runs on a dry lube IGUS bearing, which is seated on a high tensile stainless sleeve and spindle. Will rotate with loads up to 11kN before any deformation occurs. In the unlikely event that the pulley does deform, the carabiner still acts as a full strength (24 kN) carabiner. Anodized for protection against the elements, especially coastal and mountain enviroments.

ITEM# MBS (lbf/kN) gate opening price
1272 5400/24 .65 inch $44.00

Rock Exotica Pirate Easy to operate keylock screw gate tactical carabiner. Great for personal munters. Large gate opening and super strong gate sleeve to withstand inward forces. Unique skull and crossbones indicator to indicate gate is unlocked.

ITEM# MBS (lbf/kN) gate opening price
1839 5850/26 1 inch $16.00

Petzl Am’D Tri-Act Easy to operate 3 stage auto lock carabiner. Weight 80 g. Meets ANSI Z133.1-2000. ANSI Z359.1-1992

ITEM# MBS (lbf/kN) gate opening price
7021 6300/28 .8 inch $19.00

Rescue Clip w/Extension Pole

Rescue Clip with 14 foot, high strength pole. Made of 7075 extruded aluminum tubing which resists bending. Collapses to 4 feet to easily fit in a truck compartment. Comes with three stage auto lock carabiner and attachment sling. Great tool for clipping out of reack anchors. Useful in various pickoff and rescue applications. Weight 2lbs.


ITEM# price
1117 $175.00



 

[Rope Rescue] [Rope] [Fire Rescue] [Hardware] [Confined Space] [Anchors] [Industrial] [Lanyards] [Tactical] [Price List]


YATES Gear Inc. 2608 Hartnell Ave. Suite 6, Redding, CA 96002
Phone: 530.222.4606     Fax: 800.YATES.16
info@yatesgear.com