Together with Ropes That Rescue Ltd., we designed this harness to meet the demands of the transmission line worker, structural access professional and arborist. It also excels as a technical and rope rescue harness. Wide anatomical waist pad for increased comfort and added back support. Modular work/tool pouch system allows the user to customize each harness to their own arrangement. Easily adjustable for variations in clothing by use of camlock buckles. Attachment points at waist, hips, chest, back (lumbar) and back (dorsal). Extra large, side positioning rings (lineman style) allow the user to easily make connections to safety belt. Chest harness specifically designed to incorporate a chest ascender (not included) for tower access work and is specially tailored to reduce chafing of the neck.Weight 6 lb. 11 oz.

• Sizes S, M, L, XL
• UL classified to meet NFPA 1983/2012 edition standards
• UL Classified ANSI/OSHA Z359.1-2007 and CAN/CSA Z259.10-12 harness standards
• Optional contoured shoulder pads available (item 414)
• Also available in Kevlar version for welding at height (item 390K).

In conjunction with PG&E, Yates has designed a special version of the 390 RTR Harness to meet the stringent requirements of ASTM F887-05 Electric Arc-Flash rating for personal climbing equipment. Constructed from webbing which is a blend of Nomex in the exterior for comfort and durability and Kevlar in the interior for strength. Specially designed for the professional transmission tower worker. Wide anatomical waist pad for increased comfort and added back support. Modular work/tool pouch system allows the user to customize each harness to their own arrangement. Easily adjustable for variations in clothing by use of camlock buckles. Attachment points at waist, hips, chest, back (lumbar) and back (dorsal). Extra large side positioning rings (lineman style) allow the user to easily make connections to safety belt. Chest harness specifically designed to incorporate a chest ascender (not included) for tower access work and is specially tailored to reduce chafing of the neck. New milled Aluminum COBRA quick connect leg buckles for easy donning. COBRA buckles are ANSI Z359.1 -2007 certified. Designed for electric utilities helicopter short haul program. Weight 7lb. 7oz. Sizes S, M, L, XL
• Meets ANSI/OSHA Class III full body harness standards
• Meets ASTM F887-05 and ANSI Z359.1-2007
• ASTM F887-05 Arc-flash testing conducted by ArcWear •Optional contoured shoulder pads available (item 414FR)

COBRA ANSI Certified leg buckles

A tuned down version of the RTR Tower Access harness. Waist belt portion of the harness uses smaller sized D rings to save weight and reduce bulk. New wider anatomical waist pad for increased comfort and added back support. Modular work/tool pouch system is included. Leg pad orientation can be adjusted to allow the user to obtain a perfect placement of the leg pad system to accommodate personal preferences. Easily adjustable for variations in clothing by use of camlock buckles. Attachment points at waist, hips, chest, back (lumbar) and back (dorsal). Chest harness specifically designed to incorporate a chest ascender (not included) for rope access work and the shoulder straps are specially tailored to reduce chafing
of the neck. Weight 5lb. 6oz.

• Sizes S, M, L, XL
• UL classified to meet NFPA 1983/2012 edition standards
• UL Classified ANSI/OSHA Z359.1-2007 and CAN/CSA Z259.10-12 harness standards
• Optional contoured shoulder pads available (item 414)

A state-of-the-art version of out popular Basic Rope Access harness. New lightweight aluminum D rings are used on side positioning, chest, and dorsal fall protection connections.Wide anatomical waist pad for increased comfort and added back support. Modular work/tool pouch system is included. New Cobra ANSI Z359.1 certified aluminum quick connect leg buckles are used for ease of donning. Leg pad orientation can be adjusted to allow the user to obtain a perfect placement of the leg pad system to accommodate personal preferences. Attachment points at waist, hips, chest, back (lumbar) and back (dorsal). Chest harness specifically designed to incorporate a chest ascender (not included) for rope access work and the shoulder straps are specially tailored to reduce chafing of the neck. Weight 5lb. 6oz.

• Sizes S, M, L, XL
• Meets ANSI/OSHA Z359.1-2007 harness standards
• Optional contoured shoulder pads available (item 414)

Together with Ropes That Rescue Ltd., we designed this adjunct suspension seat designed for use in conjunction with a work positioning harnesses (Basic Rope Access, RTR Tower Access, Voyager, etc.). Suitable for work involving alternate periods of suspension on a rope. Increases comfort in suspension while still allowing complete leg mobility for climbing. Designed to connect to rear slot of side positioning D-Rings of harness with stainless steel screw link (provided). Cordura covered, close cell laminated pad is 4" width. Arizona chair is easily adjustable on both sides of seat. One size fits most. Weight 2.5 lbs.

• Sizes M (24"+), L(28"+), XL(32"+)
• Weight 2.5 lbs

A tuned down super light weight version of the Basic Rope Access harness at a very attractive price. Waist belt portion of the harness uses smaller and thinner padding material to save weight and reduce bulk. Wide anatomical leg pad are also a thinner padding material but offer adequate comfort and support. Leg pad orientation can be adjusted to allow the user to obtain a perfect placement of the leg pad system to accommodate personal preferences. Easily adjustable for variations in clothing by use of camlock buckles. Dorsal D ring is easily adjustable on rear of chest. Attachment points at waist,chest, and back (dorsal). Rear haul/tag line attachment webbing loop(Rated 3,600 lbf.). Chest harness specifically designed to incorporate a chest ascender (not included) for rope access work and the shoulder straps are specially tailored to reduce chafing of the neck. Weight 4lb. 4oz. Great harness for entry level rope access, theatrical rigging, wind tower climbing, short haul, and basic rope rescue uses.

• Sizes S/M, L/ XL
• Optional contoured shoulder pads available (item 414)
• UL classified to meet NFPA 1983/2012 edition standards
• UL Classified ANSI/OSHA Z359.1-2007 and CAN/CSA Z259.10-12 harness standards

NEW "Stablock Leg Buckle System"

For professional use in stage rigging and construction applications where a lightweight Class III harness with positioning rings and multiple attachment points are desired. 5 inch waist pad provides extreme comfort. Quickly and easily donned and adjusted by use of camlock buckles. New contoured shoulder webbing with removable shoulder pads. Improved wider leg pads for more comfort. Attachment points at waist, hips (positioning), chest (sternum), back (lumbar) and back (dorsal).
Weight 5 lb. 9 oz.
• Sizes XS, S, M, L, XL
• All black material with contrasting thread
• Large D rings for multiple connections
• UL classified to meet NFPA 1983/2012 edition standards
• UL Classified ANSI/OSHA Z359.1-2007 and CAN/CSA Z259.10-12 harness standards

NEW "Stablock Leg Buckle System"

Designed with a safety vest built into the harness for high visibility and ease of donning. Great for confined space stand-by use as well as victim rescue applications. Manufactured from custom made webbing to offer a lightweight, durable harness. Epoxy coated, sliding back dorsal D ring, for antisparking compliance. D rings on shoulders for confined space lowering applications. Color coded, quick connect leg buckles are also epoxy coated for anti-sparking. Comes equipped with sub-pelvic strap. Sternal attachment loops can be connected with delta link (provided) for use in work ositioning, ladder climbing and rescue applications.
• One size, fully adjustable
• Color coded quick connect leg buckles
• Optional leg pads available (item 413)
• UL classified to meet NFPA 1983/2012 edition standards
• UL Classified ANSI/OSHA Z359.1-2007 and CAN/CSA Z259.10-12 harness standards

Manufactured from custom made webbing to offer a lightweight, durable harness. A resin bond agent has been added to the webbing to increase wear and durability. Universally sized for a wide range of workers. Epoxy coated, sliding back dorsal D ring, for anti-sparking compliance. Rear D ring pad prevents D ring from sliding and will not break if worker is lowered on it. Color coded, quick connect leg buckles are also epoxy coated for anti-sparking. Comes equipped with sub-pelvic strap. Sternal attachment loops can be connected with delta link (provided) for use in work positioning, ladder climbing and rescue applications.
• One size, fully adjustable and XL
• Shoulder D rings available at $10 charge
• Color coded quick connect leg buckles
• Also available in all black (item 366B)
• UL classified to meet NFPA 1983/2012 edition standards
• UL Classified ANSI/OSHA Z359.1-2007 and CAN/CSA Z259.10-12 harness standards

All black version of the Fall Safe Harness, designed for the stage rigging industry where workers are put in a position where they need to be of low visibility. Works well for tactical applications where a dorsel atachment is needed. Custom made webbing offers a lightweight, durable harness. Webbing is treated to increase abrasion resistance while reducing flammability. All hardware epoxy coated non-reflective black. Comes equipped with sub pelvic strap. Sternal attachment can be connected with delta link (provided) for use in work positioning, ladder climbing and self rescue applications.
• Weight 2 lb. 14 oz.
• One size, fully adjustable.
• Optional leg pads available (item 413)
• Optional shoulder pads available (item 411)
• UL classified to meet NFPA 1983/2012 edition standards
• UL Classified ANSI/OSHA Z359.1-2007 and CAN/CSA Z259.10-12 harness standards