New Dyna-Stat™ Heli-Rappel Technical Rescue Rope

Patent Pending

Developed by BlueWater Ropes and Yates Gear. Dyna-Stat has all the best qualities of a dynamic climbing rope combined with the static qualities of a low elongation technical rescue rope. Dyna-Stat has been developed specifically for use with the new Petzl RIG as a heli-rappel rope descent system. Dyna-Stat has dynamic properties with just enough stretch to not shock load the helicopter or the rappeller during abrupt stops while on rappel. It is also rugged enough to excel as a technical rescue rope used in lowering and raising systems where a low elongation static rope is desired. Dyna-Stat is an ideal mountain rescue multi-function rope.
Try one and experience the advantage of Dyna-Stat technology.
Patent Pending.

• Rope diameter 7/16 inch (11.5mm)
• Available in orange w/blue tracer and black w/OD tracer
• Standard lengths: 200 feet
• Custom lengths and colors available on request
• Sewn termination attachments points with stainless steel captive thimble on both rope ends to allow rope ends to be switched for extended life span

Rope type:..................... Assaultline - Dyna-Stat - Enduro Dynamic
Diameter:.........................11.5 mm......... 10.7 mm ..........11.0 mm

MBS (lbs)(Aver-2S.D.).....7193............... 7912.................5427

Elongation @ 300 lbf:...... 3.40.................3.13..................7.70
Elongation @ 600 lbf:.......
5.40.................6.25................16.40
Elongation @ 1000 lbf:.....
8.40.................8.85................25.00

Rope falls held:..............4 Fail..............4 Fail............... 15 Pass
Impact force 1st. fall:..11.9 kN............11.2 kN...............8.5 kN

NFPA elongation certification:
< 10% at 10% MBS:......... 6.20%.............. 9.40%............. 14.70%

ITEM# 1576 $1.20 ft.

Sewn Termination w/ stainless thimble on both ends of rope

ITEM PART # PRICE
1576150THIMBK-150'Blk $209
1576200THIMBK-200'Blk $280
1576300THIMBK-300'Blk $418

1576150THIMOR-150'Orange

$209
1576200THIMOR-200'Orange $280
1576300THIMOR-300'Orange $418

Dyna-Stat Heli-Rappel Rope from Yates Gear on Vimeo.


Heli-Ops Harness

Designed specifically for heli-rappel and short haul operations with a single frontal attachment point located two inches below a standard sternal attachment point, 4 inches above normal waist attachment. This new sub-sternal steel D ring attachment is the perfect balance point to allow a secure and comfortable attachment location while limiting unintentional inversion. Harness cannot be taken apart or chest separated from seat portion. Waist belt portion of the harness uses smaller and thinner padding material to save weight and reduce bulk. Wide anatomical leg pads offer adequate comfort and support. Leg pad orientation can be adjusted to accommodate personal preferences. Easily donned and adjustable for variations in clothing and user size by use of forged two piece friction buckle system. Steel dorsal D ring is easily adjustable on rear of chest. 3600 lbf. personal retention lanyard D ring attachment located in center rear of waist pad. Shoulder straps are specially tailored to reduce chafing of the neck. Weight 3 lb. 15 oz.

• Sizes S/M, L/ XL
• UL classified to meet NFPA 1983/2012 edition standards
• Meets ANSI/OSHA Class III harness standards

• Optional contoured shoulder pads available (item 414)

Product Information and training video (Yates Gear on VIMEO)

NEW "Stablock Leg Buckle System"

ITEM# 388 S/M $275.00
ITEM# 388 L/XL $275.00

Heli-Ops Harness from YatesGear on Vimeo.


ARS Heli-Ops Harness

Designed specifically for heli-rappel and short haul and hoist operations with a single frontal attachment point. Color coded
webbing allows for easy and fast donning of harness. Reflective tape is added to front and back of harness. This new substernal steel D ring attachment is the perfect balance point to allow a secure and
comfortable attachment location while limiting unintentional inversion. Harness cannot be taken apart or chest separated from seat portion. Same waist and leg padding system as standard 388 Heli-Ops Harness. Easily donned and adjustable for variations in clothing and user size by use of forged two piece color coded friction buckle system. Steel dorsal D ring is easily adjustable on rear of chest. 3600 lbf. personal retention lanyard D ring attachment located in center rear of waist pad. Shoulder straps are specially tailored to reduce chafing of the neck. Weight 3 lb. 15 oz.

• Sizes S/M, L/ XL
• UL classified to meet NFPA 1983/2012 edition standards
• Certification for FAA TSO-C167 in process
• Meets ANSI/OSHA Class III harness standards

• Radio mic tabs on shoulders
• Optional contoured shoulder pads available (item 414)

NEW "Stablock Leg Buckle System"

ITEM# 338-ARS S/M $300.00
ITEM# 338-ARS L/XL $300.00

Heli-Ops Harness (Technical Rescue Version)

Designed specifically for heli-rappel, short haul and technical rope rescue operations. Similar to our Heli-Ops harness with an additional modification of a unique climbing harness style belay loop located
at waist level. This makes the harness ideal for technical rescue operations. Single front attachment point located two inches below a standard sternal attachment point, 4 inches above normal waist
attachment. This new sub-sternal aluminum D ring attachment is the perfect balance point to allow a secure and comfortable attachment location while limiting unintentional inversion. Harness cannot be
taken apart or chest separated from seat portion. Waist belt portion of the harness uses smaller and thinner padding material to save weight and reduce bulk. Wide anatomical leg pads offer adequate comfort and support. Leg pad orientation can be adjusted to accommodate personal preferences. Easy doning and adjustment of leg loop portion of harness by use of Cobra aluminum quick connect buckles. Aluminum dorsal D ring is easily adjustable on rear of chest. Rear personal retention lanyard D ring attachment (3600 lbf.) Shoulder straps are specially tailored to reduce chafing of the neck. Great harness for entry level rope access, theatrical rigging, wind tower climbing, short haul, and basic rope rescue uses. Weight 3 lb. 12 oz.

• Sizes S/M, L/ XL
• Meets ANSI/OSHA Class III harness standards
• Optional contoured shoulder pads available (item 414)

COBRA ANSI Certified leg buckles

ITEM# 389 S/M $365.00
ITEM# 389 L/XL $365.00

Heli-Ops Harness(Rescue Version) from Yates Gear on Vimeo.


Petzl RIG Descender

Designed for rope access work (expert users only). Multi-function handle allows the user to unlock the rope and control the descent with the hand on the free end of the rope and position themself while on the rope without tying off the device. The automatic return system on the handle limits risks in case of an involuntary action by the user. The safety gate on the moving side plate helps prevent dropping the device and facilitates installation of the rope and passing intermediate anchors. Can also be used for short ascents (RAD system). For rope between 10.5 and 11.5mm in diameter. Colors: Black ($155.00) or Gold.

Product Information and training video (Yates Gear on VIMEO)
Petzl product information and training video

ITEM# 7018 $150.00

 


Petzl RIG from YatesGear on Vimeo.


Petzl RIG safety Turtorial from YatesGear on Vimeo.


Yates/ISC Figure 9 Anti-Twist Rescue Descender

New style Figure 9 descender with attachment eye set 90 degrees to the rest of the unit. The Figure 9 also has a top spike which easily allows rope to be wrapped over the top for added friction and control of heavier loads. Forged aluminum, hard coat anodized.

• Classified to meet NFPA 1983/2006 edition standards.

ITEM# 1025 $50.00


Special Ops Full Body Harness

A full body harness and tactical load bearing vest are combined offering a unique product for civilian Special Operations and SWAT personnel. This modular harness and tactical vest combination was originally developed by Survival Inc. as the Joint Services Aircrew Vest and Extraction System™ (JSAVES) for US Air Force helicopter pilots and crew. Some additional features and add on modules were added for civilian Special Ops needs. Comes with front attachment points which when connected with a locking carabiner can be used for extraction or rappel applications. (Used with Extraction/Personal Retention Lanyard item # 566). A rear dorsal D ring is provided for helicopter spotter or gunner lanyard attachment. Dorsal D ring is used for SPIE Lanyard attacnment (Item # 364). Easily donned by use of quick connect double release action Mil-Spec. COBRA buckles on waist, sternum and leg loops. Leg loops are stowed in concealed pockets on the bottom of the vest until needed. 4 inch padded waist pad. Tactical load bearing vest is designed using the latest military Modular Lightweight Load Carrying Equipment (MOLLE) system to easily attach desired pockets, ammo pouches and weapons. The vest does not come with any pockets or pouches. Molded rubber drag handle included on rear of vest. Weight 5 lb. 12 oz. with vest.

• One size, fully adjustable
• Available in terra and black
• Additional attachments include floatation vest and rescue swimmer attachment

• SPIE Lanyard (item 364) not included
• Extraction/Personal Retention Lanyard (item 566)
not included

ITEM# 361 $515.00

Special Forces Full Body SPIE Harness

Designed for use as a full body harness for insertion and extraction (SPIE) applications. Works well for emergency egress from multistory buildings or rooftops. Dorsal D ring is used for SPIE Lanyard attacnment (Item # 364). Safety sternum strap with Cobra quick connect buckle for added security during SPIE usage. Sternum level attachment point allows an injured or wounded soldier to be lowered in an upright position (Used with Extraction/Personal Retention Lanyard item # 566).Cobra quick connect buckles on leg portion of harness for easy and fast donning. Designed to be worn over tactical web gear and body armor. Weight 1 lb. 12 oz.

• One size fits all
• Available in terra, black and foliage green


• SPIE Lanyard (item 364) not included
• Extraction/Personal Retention Lanyard (item 566)
not included

 

COBRA ANSI Certified leg buckles

 

ITEM# 363 $220.00

SPIE Lanyard

22 inch lanyard made of 7000 lbf. (31kN) nylon webbing. Designed to girth hitch to dorsal D ring of Yates Stabo or Extraction harness for SPIE extraction operations. Green gate DMM Tactical OvaLock 3 Stage aluminum carabiner w/captive pin included. Made in USA.

ITEM# 364 $60.00

Helo Personal
Retention Lanyard

For use as a personal retention lanyard in a helicopter. Designed using the first all black, non reflective, oxide plated quick release shackle made of stainless steel by Ronstan. Oversize quick release shackle allows the user to easily release from harness or belt in the event of an unplanned landing. Swedged release pin (SOCOM requirement) eliminates plunger pin from releasing in the event the retaining ring is broken. Retaining split ring is safety TIG welded. Quick release shackle uses velco to secure the release tab in place to lessen the chance of inadvertent release. Built with mil spec 5625 tubular webbing, this lanyard tests at over 3400 lbf. (15kN) breaking strength. Kong Tango double locking snap hook is classified to meet NFPA 1983/2006 edition standards. Strength 7425 lbf. (33kN). Made in USA.

• Available in terra and black
• Length retracted 20 inches
• Length fully extended 31 inches

NEW Mini Bird Helo Personal Retention Lanyard
• Lanyard without retraction bungee inserted in webbing
• Length 16 inches

ITEM#    
565B Helo Personal Retention Lanyard, black 31 inches $115.00
565T Helo Personal Retention Lanyard,
terra 31 inches
$115.00
568B Mini-Bird Helo PRL black 16 inches $107.00
568T Mini-Bird Helo PRL terra 16 inches $107.00
 

Helo Personal
Retention Lanyard w/Shock Stop

For use as a personal retention lanyard in a helicopter. Designed using the first all black, non reflective, oxide plated quick release shackle made of stainless steel by Ronstan. Oversize quick release shackle allows the user to easily release from harness or belt in the event of an unplanned landing. Swedged release pin (SOCOM requirement) eliminates plunger pin from releasing in the event the retaining ring is broken. Retaining split ring is safety TIG welded. Quick release shackle uses velco to secure the release tab in place to lessen the chance of inadvertent release. Built with mil spec 5625 tubular webbing, this lanyard tests at over 3400 lbf. (15kN) breaking strength. Kong Tango double locking snap hook is classified to meet NFPA 1983/2006 edition standards. Strength 7425 lbf. (33kN). Made in USA.

Yates SCREAMER Shock absorber added for energy absorbtion. In the event an activation force of 2.5 kN (600 lbs) is exerted on the lanyard during a fall the SCREAMER has the potential to absorb 2-3 kN of energy if fully activated (11 inches).

• Available in terra and black
• Length retracted 26 inches
• Length fully extended 42 inches

ITEM#    
569B Helo Personal Retention Lanyard w/Shock Stop, black 42 inches $149.00
569T Helo Personal Retention Lanyard w/Shock Stop, terra 42inches $149.00

SF Personal Retention Lanyard w/two Kong Tango Carabiners

For use as a personal retention and extraction lanyard. Designed to connect to users harness and to fixed surface or extraction point via unique aluminum snap hook. Built with mil spec. 5625 tubular webbing, this lanyard tests over 3400 lbf. (15kN) breaking strength. Kong Tango double locking snap hooks areclassified to meet NFPA 1983/2006 edition standards. Strength 7425 lbf. (33kN). Made in USA.

• Available in terra and black
• Length retracted 23 inches
• Length fully extended 36 inches

ITEM#    
567B

SF Personal Retention Lanyard - black

$107.00
567T SF Personal Retention Lanyard - terra $107.00
 

Rappel Master Adjustable Lanyard w/Shock Stop

For use as a adjustable length personal retention lanyard for Rappel Masters, Crew Chiefs and Riggers. Designed to connect to users harness and to fixed surface or helo rappel point via unique aluminum snap hook. Lanyard has adjustable length using Yates adjustable dasy chain system. Adjuster buckle has strength of 6 kN. Kong Tango has 1.1 inch gate opening. Built with mil spec. 5625 tubular webbing, the ultimate strength of lanyard tests over 3400 lbf. (15kN) breaking strength. Kong Tango double locking snap hooks are classified to meet NFPA 1983/2006 edition standards. Strength 7425 lbf. (33kN). Made in USA.

Yates SCREAMER Shock absorber added for energy absorbtion. In the event an activation force of 2.5 kN (600 lbs) is exerted on the lanyard during a fall the SCREAMER has the potential to absorb 2-3 kN of energy if fully activated (11 inches).

• Available in terra and black
• Length retracted 18 inches
• Length fully extended 47 inches

ITEM#    
571B Rappel Master Lanyard w/Shock Stop, black 47 inches $165.00
571T Rappel Master Lanyard w/Shock Stop, terra 47 inches $165.00

Helo Personal Retention Lanyard Set

Sold as complete set of retention lanyards for the operators while working Helo operations with ship door in open position who backup security of a redundent lanyard system. Only one lanyard has quick release option. Set combines one Rappel Master Lanyard(571) and one Helo Personal Retention Lanyard w/Shock Stop(569).

• Lanyard 571(Blue), Lanyard 569 (Orange)

ITEM#    
574 Helo PRL Set $314.00
 

SF Personal Retention Lanyard w/DMM Captive Eye Carabiners

For use as a personal retention and extraction lanyard. Designed to attach to users harness and connect to extraction point or Helo hard point via unique New DMM captive Eye Carabiner. Built with mil spec 4000 lbf (18 kN) 5625 tubular webbing. Lanyard rated strength 3400 lbf. (15kN). High strength hot forged aluminum alloy captive eye carabiner. Unique patented "Locksafe" three stage autolocking gate mechanism allows for 3600 lbf. (16kN) gate strength. 100% Proof loaded to 3,600 lbf (16kN). Minimum strength 6750 lbf. (30kN).Carabiner manufactured in Wales by DMM Ltd. Carabiner NSN: 8465-99-151-3939

Certified to: ANSI/ASSE Z359.12(09)-1992. EN362-2004 and CSA Z259.12-11. Lanyard Made in USA.

• Available in terra and black
• Length retracted 23 inches
• Length fully extended 36 inches

ITEM#    
567B-DMM

SF Personal Retention Lanyard black

$137.00
567T-DMM SF Personal Retention Lanyard terra $137.00

Rappel Master Adjustable Lanyard w/Shock Stop and DMM Captive Eye Carabiners

For use as a adjustable length personal retention lanyard for Rappel Masters, Crew Chiefs and Riggers. Designed to connect to users harness and to fixed surface or helo rappel point via unique New DMM captive Eye Carabiner. Built with mil spec 4000 lbf (18 kN) 5625 tubular webbing. Lanyard rated strength 3400 lbf. (15kN). Lanyard has adjustable length using Yates adjustable dasy chain system. Adjuster buckle has strength of 6 kN.High strength hot forged aluminum alloy captive eye carabiner. Unique patented "Locksafe" three stage autolocking gate mechanism allows for 3600 lbf. (16kN) gate strength. 100% Proof loaded to 3,600 lbf (16kN). Minimum strength 6750 lbf. (30kN).Carabiner manufactured in Wales by DMM Ltd. Carabiner NSN: 8465-99-151-3939

Certified to: ANSI/ASSE Z359.12(09)-1992. EN362-2004 and CSA Z259.12-11. Lanyard Made in USA.

Yates SCREAMER Shock absorber added for energy absorbtion. In the event an activation force of 2.5 kN (600 lbs) is exerted on the lanyard during a fall the SCREAMER has the potential to absorb 2-3 kN of energy if fully activated (11 inches).

• Available in terra and black
• Length retracted 18 inches
• Length fully extended 47 inches

ITEM#    
571B-DMM Rappel Master Lanyard w/Shock Stop, black 47 inches $195.00
571T-DMM Rappel Master Lanyard w/Shock Stop, terra 47 inches $195.00
Yates Tactical Rappel/FAST Rope Gloves. "New" Double Layer Palm!

Thick full-grain "Nrw" double layer palm extends over the palm and to the second joint of your fingers to provide added protection from the heat and friction generated when fast roping. Index finger is separated for trigger finger dexterity. Designed to fit over flight gloves. Also excellent for tactical and helirappel use. Carabiner hole in wrist for attaching to harness.

• Available in black and milti-cam
• Sizes: S-2XL

ITEM# 925(Black) $50.00
ITEM# 925MC $50.00


[Rope Rescue] [Rope] [Fire Rescue] [Hardware] [Confined Space] [Anchors] [Industrial] [Lanyards] [Tactical] [Price List]


YATES Gear Inc. 2608 Hartnell Ave. Suite 6, Redding, CA 96002
Phone: 530.222.4606     Fax: 800.YATES.16
info@yatesgear.com
.